Installing proteus 7.6 SP4 on WIN7 64bit

1. Download Proteus 7.6 SP4 from  here

2. Download Patch and proxy-license from  here

3. Make sure you have uninstalled any previous versions of Proteus from your system

4. Install Proteus 7.6 SP4 from setup.exe file.    Next->Yes->Next

5. If you didn’t install it before, you will notice that there is no license file exist.
If you installed it before you will automatically  find the license.
But ensure that it is valid and not expired. And if it is invalid, you must do the step in the notes bellow.
So, press Next

6.  From the dialog appeared select browse for key file.
You will find the license file in the crack folder that you’ve downloaded  at step[2] select the license file “Sonsivri”
Then select open:

7. Select install

8. Select Yes then Close

9. Ensure that the Expiry date is 1/1/2030

10. Next->Next->Next->Next

11. Finish

==================================================================

To install crack/patch:

1. Restart your system

2. Disable your Antivirus. Do not panick

License.patch rar file does not contain any viruses.

Its False detection. Do not unpack patch file until antivirus is disabled

3. Paste the file into the Program installation folder in program files:
 example - "C:\Program Files\Labcenter Electronics\Proteus 7 Professional"
4. Run the Patch file and press Patch
   Note: for windows Vista and windows 7 you must run it as an administrator
   by right click on the file and select "run as an administrator".
5. A message will appear asking for a missing file "ISIS.EXE". So, go to:
  "C:\Program Files\Labcenter Electronics\Proteus 7 Professional\BIN" and point to the file
6. Another message asking for a missing file "82XX.DLL" so, go to
"C:\Program Files\Labcenter Electronics\Proteus 7 Professional\MODELS" and point to the file
7. Exit
=================================================================================
Now Run it as ISIS7

Enjoy your Fully-Functional Proteus 7.6 SP4
Like and Comment for improvement of future posts
- Nishant Nath
About these ads

63 comments on “Installing proteus 7.6 SP4 on WIN7 64bit

  1. useless, compiler won’t work for 64bit, why did you lie?! I’ve uninstalled v7.7 to install your download because you’ve stated that it would be supported on 64 bit systems.

  2. The software works perfectly fine n x64 OS (WIN7).
    I have been using it since long time.
    If its not running on your system i suggest you to do the following:
    1. Delete all registry entries and folders from c: of any previous proteus installations
    (I am sure you hadn’t done that… its bound to fail to run)
    2. run disk-clean-up utility to clean all temp files and setup logs
    3. Re-install

    Hope that helps

  3. TQ bro, for your instruction installer. I can Run my protuse now, but sorry to say your instruction must be detail step by step that people can understand exmple: Mr Or, maybe got confuse with your instruction.

    What ever, TQ for sharing this information. I’m appreciate.

  4. Hey’ nishanth
    thanx man really…great…it worked for me..

    for those who still have problems after following the above procedure:
    if you have installed proteus:
    $uninstall proteus(type uninstall a program in search box and then click it and then select proteus then click uninstall/change)
    $ type disk cleanup in your searchbox and select c drive and then clean it.it will delete your temporary files.
    $ then turn off your antivirus(after installation you can turn it on)then use patch…

    The reason ypu cannot patch is that your antivirus is on and thats all..
    regards,
    ishan

  5. I’ve installed and patched the way instructed here. It works. but when I run the ISIS 7, it only run for 15 to 30 minutes. after that, the ISIS window dissapear. why?? any help please!!

  6. Please don’t forget to right click the patch file and “run as an administrator” instead of double clicking it. If you run direct in win 64 it won’t work

  7. Hey I followed all the steps and installed proteus successfully. But when I am using it closes all of a sudden without any warning…is there any patch/fix for that…

    • Manual Process:
      On Win7 : search regedit after clicking on the Windows Orb
      On Win XP : type regedit at the cmd prompt after clicking run
      Use find option using keyterms ‘isis’ and ‘proteus’ and delete each entry

      Easier Process:
      Use a software tool like CCleaner or Tune Up Utilities or some other for complete uninstall followed by registry cleaning tool.

  8. Im using windows 8 , I installed proteus and then manually inputed the license , when I tried to enter to ISIS it appeared a message that said invalid license , so then I read that I needed to patch the program so Im trying to do that but when i search for the files they ask for it says something like its on use or it cant be found , any ideas how to fix that ?

    • Have you patched after pasting the contents of License.patch.rar here:
      C:\Program Files\Labcenter Electronics\Proteus 7 Professional

      And run the patch file using ‘Run As Administrator’ option ?

  9. thanx a lotttttt bro……we have been suffering a lot for it……bt u made it possible..thanx bro…god bless

  10. hey i have installed proteus 7.6 with all settings what you all mentioned. but when i put the components the isis professional disappears and it also repeats even after 15min, i have uninstalled many times and re installed with all settings but the problem still repeats. please help me what to do.

    • hi reshma,

      It could be an improper patching or problem with the dll files. Can’t say for sure.
      By isis professional disappears did you mean the window crashes? or something else?

      >> In case of improper patching please check if you patched after pasting the contents of License.patch.rar here:
      C:\Program Files\Labcenter Electronics\Proteus 7 Professional
      And run the patch file using ‘Run As Administrator’ option ?

      (A very common error caused by most people)

      >> In case its the problems with dll files use a dll files fixer.

      >> you could also be having problems with your display adaptor, follow these steps to overcome them:
      open ISIS and go to system menu -> set display options,
      there are three options there choose among them and see which works best.
      windows GDI
      double buffer
      openGL

      >> Its been also known that certain time-zones settings can crash ISIS. Is your system set to INDIA Time Zone? If not set it at boot-startup.

      Hope that helps
      Nishant Nath

      • thanks for your replay

        i have tried all what you have told me to do.the patching is done in the same way what you said and i used dll files fixer too, changed the system display settings the time zone is the same of India time zone, but the problem repeats the isis window would goes invisible after 15-20 mintues and the file does not contains what i done before. would you please tell me any other software where i can simulate the micro controllers. please help me

        thank you

  11. Hi,
    If old installation is present then simply uninstall it from your computer. The follow the steps below
    Download the software and patch from the give links
    a. Download Proteus 7.6 SP4 from here >> http://www.mediafire.com/?q0ywmihyngw#1
    b. Download Patch and proxy-license from here >> http://www.mediafire.com/?mnqnmiynjmy
    c. unrar and begin
    1. install setup76 Sp4.exe as administrator
    2. next and …
    3. go to C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\BIN
    4. run LICENCE.EXE as administrator
    5. select the key Sonsivri.lxk file from its source path
    6. after successfull license key installation
    7. copy proteus.pro.7.6.sp4-patch.exe onto C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\BIN\ folder
    8. run proteus.pro.7.6.sp4-patch.exe the file as administrator
    9. patch
    10. select yes to browse for 82XX.DLL
    11. select the path C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\MODELS\
    12. select 82XX.DLL
    13. open
    14. patch complete successfully
    15. run ISIS as administrator
    16. done.

  12. I tried to install Proteus 7.6 for win7 64bit which has expired licese key which i didnt recognise and tried to install it with expired license key and because of that it didnt install properly… Now I removed all the files related to this proteus… As it didnt install successfully so i didnt found this file in control panel to uninstall… I delete all the temp file and cleaned the disk. Later i downloaded 7.6sp4 and patch file. bt at the time of running the setup it is taking previous license key. And my set up is failed.. So how can i delete my previous proteus license key… Help me… It is throwing the error msg stating that model\ADC083x.dll file is missing

    • Hi Ashwini,
      Its most probably due to some file remaining in in your registry.
      Delete the folder ISIS or Proteus (Installation folder from progam files or program files (x86))
      Go to (Windows 7)Orb -> Search for Regedit -> Go to find option and search for all entries with name ISIS or proteus … keep finding each such entry and delete all of them. Exercise caution because at time ISIS will be found in words like CRISIS … so delete only those with exactly the word ISIS. Run disk clean up after that and restart system then re-install choose a different location like ISIS1 instead of simply ISIS which is the default.

      • Thank u sooooooooo much for your help…. Finally I successfully finished up with my set up….
        I made Two mistakes at the time running the set up 1) I accept expired license, which later i deleted that from registry i.e.C:\Windows\REGEDIT 2) I didnt disabled my quick heal thats y it is blocking my MODELS file to be install…. Now both the issues are resolved… I hope it will work fine….. I learnt couple of things from my mistakes… It feels so g8 wen u achieved something by doing hard work……

  13. Hi, when I was patch the dll file, all the dll files were failed to patching except licence.dll. What to do?
    Thanks.

    • Old versions of licenses of proteus may exist in your system or you could have missed a crucial step. (have you followed exactly as per the order below)

      To install crack/patch:
      1. Restart your system
      2. Disable your Antivirus. Do not panick
      License.patch rar file does not contain any viruses.
      Its False detection. Do not unpack patch file until antivirus is disabled
      3. Paste the file into the Program installation folder in program files:
      example – “C:\Program Files\Labcenter Electronics\Proteus 7 Professional”
      4. Run the Patch file and press Patch
      Note: for windows Vista and windows 7 you must run it as an administrator
      by right click on the file and select “run as an administrator”.
      5. A message will appear asking for a missing file “ISIS.EXE”. So, go to:
      “C:\Program Files\Labcenter Electronics\Proteus 7 Professional\BIN” and point to the file
      6. Another message asking for a missing file “82XX.DLL” so, go to
      “C:\Program Files\Labcenter Electronics\Proteus 7 Professional\MODELS” and point to the file
      7. Exit

      If it still fails try the process i suggested to Ashwini (it worked)
      Delete the folder ISIS or Proteus (Installation folder from progam files or program files (x86))
      Go to (Windows 7)Orb -> Search for Regedit -> Go to find option and search for all entries with name ISIS or proteus … keep finding each such entry and delete all of them. Exercise caution because at time ISIS will be found in words like CRISIS … so delete only those with exactly the word ISIS. Run disk clean up after that and restart system then re-install choose a different location like ISIS1 instead of simply ISIS which is the default.

  14. i install proteus 7.6 but one problem i faced. the memory could not read error are occur pls help me……..

  15. I have a problem about installing path which say can not access the file Maybe it’s in use Please close the file before patching

    • Did you copy the files into the Program installation folder in program files:
      example – “C:\Program Files\Labcenter Electronics\Proteus 7 Professional”
      and also run the patch file by right clicking -> Run as administrator ??

      To install crack/patch:
      1. Restart your system
      2. Disable your Antivirus. Do not panick
      License.patch rar file does not contain any viruses.
      Its False detection. Do not unpack patch file until antivirus is disabled
      3. Paste the file into the Program installation folder in program files:
      example – “C:\Program Files\Labcenter Electronics\Proteus 7 Professional”
      4. Run the Patch file and press Patch
      Note: for windows Vista and windows 7 you must run it as an administrator
      by right click on the file and select “run as an administrator”.
      5. A message will appear asking for a missing file “ISIS.EXE”. So, go to:
      “C:\Program Files\Labcenter Electronics\Proteus 7 Professional\BIN” and point to the file
      6. Another message asking for a missing file “82XX.DLL” so, go to
      “C:\Program Files\Labcenter Electronics\Proteus 7 Professional\MODELS” and point to the file
      7. Exit

    • Sometimes ISIS.exe remains in background and this creates problems during patching. You may proceed without restart by verifying no process similar to ISIS.exe is active through the process tab in Task Manager

  16. I followed all the steps.Pasted the patch file as mentioned and tried to run it as admin but a distorted window appears and i could manage to read “ISIS.EXE” and nothing happens after that. There a two options below which say patch and about but none of them work. What should i do ??

    • You have to locate the two files and patch accordingly. please see the process in the post. It could also be an issue with the graphics driver as the window shows distorted for you.

  17. thanq so much nishanth!!!!!!!!!!…..
    i have tried for proteus so many times with other soft wares.but those are not supported.finally i installed this soft ware and its working properly………….
    i am very happy………once again thax

  18. does this setup work for windows 8 also?
    I have proteus 7.6 SP0(I am not sure for SP version) that I have downloaded from this site only. I was working with it since last 6 years on windows XP and windows 7. it was really fine. but now I have windows 8. the software is installed correctly and also runs on windows 8. but after few minutes it terminates and gives error as “ISIS.exe has stopped unexpectedly”.
    so please help me.

  19. i hv installed the software on win8 n it works. thank….now if possible
    please try to find out the solution for this virus problem. patch file is ” trojen” thats why its creating problem in antivirus.

    • Hi Ashutosh,

      The trojan detection is a false alarm. It doesn’t get detected with my Kaspersky IS … but gets detected on most free antivirus/ free versions of them like avira, avast, quickheal etc

      • i am not able to install proteus 7.6 sp4 while patching it shows main file updating failed, operation cancelled…………….plzz help me out
        please give me your email id…………..i need your help urgently

  20. Hi Nipun,

    Common oversights in patching process:
    1. Have you disabled your antivirus then started the patching process?
    2. Had you copied the patch file as mentioned in process:
    Paste the file into the Program installation folder in program files:
    example – “C:\Program Files\Labcenter Electronics\Proteus 7 Professional”
    Run the Patch file and press Patch
    3. Had you started the installer/patching tool as administrator (Right click – > Run as admin)

    Regards
    Nicky :)

  21. heya bro,
    thanks for the files and procedure.I have installed every thing right but I am facing a problem will debugging the circuit I have drawn.It is showing an error %USWERPROFILE%\AppData\Local\Temp\LISA8439.SDF I dont know what went wrong…plz help….

    • Not able to pinpoint exactly what error you are refering to but most probably … it is because of corruption of the user profile, sometimes happens for no specific reason. You can try making the circuit from scratch / clearing your proteus & windows temp folders.
      A screenshot of the error will be more helpful in troubleshooting.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s